User Manual

Multilingual Instruction Manual

	Wenn Sie die elektronische Version des deutschen Handbuchs durchsuchen möchten, besuchen Sie bitte den folgenden Link oder scannen Sie den QR-Code unten auf der Seite.
	Si vous avez besoin de parcourir le manuel d'utilisation en français, veuillez visiter le lien suivant ou scanner le code QR en bas de la page.
	Se hai bisogno di sfogliare il manuale utente in italiano, visita il seguente link o scansiona il codice QR in fondo alla pagina.
	Si necesita consultar el manual de usuario en español, visite el siguiente enlace o escanee el código QR al final de la página.

www.bokman-e.com/manual

Package Included

UK Plug	EU Plug

Product Overview

UK Plug	EU Plug

Product Specifications

Parameter

Working Voltage	AC200-250V(EU/UK)
Rated Power	2.8-3.68kW (EU)
Frequency	50/60Hz
IP Degree	IP65
Mechanical Life	No-load plug in/pull out > 10000 times
Impact of External Force	1M Drop and 2T Vehicle Run Over Pressure
Insulation Resistance	> 100M ohm (DC 500V)
Terminal Temperature Rise	<50K

Use Environment

Working Temperature	-30℃ - +50℃
Working Humidity	5% ~ 95%HR
The Cooling Way	Natural air cooling

Display Function

Display Parameters

Charged Voltage, Charged Current,

Charged Power, SOC, Fault Code

Physical Size

Control Box Size

L210 x W85 x H50 (mm)

Control Box LCD Display

The Interface Display

	Click the Current Button to adjust the power: 6A/8A/10A/13A/16A
	Click the Delay Button once to add 1 hour (Maximum 8 hours). Eg. If you set 2 hours, the charging will start automatically after 2 hours.
	Long press the Current Button for 3s Switch to Grounding mode
	Long press the Delay Button for 3s Switch to No Grounding mode

How To Start/Stop Charging

Start Charging

1.Check the power distribution cable for damage before powering up.

2.Connect the power plug into the socket on the wall.

3.Connect the charging plug into the vehicle. Make sure it is fully inserted.

Stop Charging

1.Disconnect the power plug from the socket on the wall.

2.Disconnect the charging plug.

3.Cover the connector cap onto charging plug.

4.Insert the charging cable into the carrying case.

Indicator Light Description

Working Condition	Red	Green	Blue
Power On(Unplugged)
Insert The Plug(Uncharged)
Charging Mode
Charging Completed
CP Voltage Abnormal
Under-Voltage Protection
Over-Voltage Protection
Ground Fault
Over Current Protection
Leakage Protection
Over-Temperature Protection

Off

Stays On

Flashing

Flashing Times

Remarks:

The frequency of error light flash is 0.5s. A continuous loop starts after the light flash stops for 2s.

Example:

Continuous loop

Control Box Function

. Leakage protection (restart recover).

. Over voltage, under-voltage protection (self-checking recover).

. Lightning protection.

. Over current protection.

. Overheat protection.

Troubleshooting

CP Voltage Abnormal

1. Unplug the power plug from the socket on the wall.
2. Unplug the charging plug from the vehicle.
3. Plug them again and check whether the problem still occurs or not.
4. If the problem still occurs, please contact the customer service for help.

Under-Voltage Protection/Over-Voltage Protection

The voltage is not stable, which triggers low/high voltage protection of the product. Please wait for a while until it works normally.

Ground Fault

There is no ground wire in your place. Please long press the delay button for 3s to switch to No Grounding mode.

Over Current Protection

The current is not stable, which triggers high current protection of the product. Please wait for a while until it works normally.

Leakage Protection

1. Cut off the electricity immediately.
2. Unplug the power plug from the socket on the wall.
3. Unplug the charging plug from the vehicle.
4. Contact the customer service for help.

Over-Temperature Protection

The temperature of the control box is too high, you can unplug the charging cable until the control box cool down, or the control box will automatically switch the charging power to a lower level, which can protect the control box from overheat. If the temperature remains high when the charging power is at its lowest level, the charging process will be automatically terminated for safety, you can reconnect the power plug to restart charging your car once the control box cool down completely.

Storage

The IEC 62196 AC EVSE Portable Electric Vehicle Charger must be stored in a clean and dry location and located away from any high heat sources. Avoid oily or corrosive substances from contacting the control box, the cable and plugs/connectors during use. Avoid any fall or drop that causes impacts to the control box. Do not forcefully pull the charge cable or damage it with sharp objects. Do not store the EV charger in the place where rodents can enter.

Warnings

. Do NOT step on / pull / fold up / knot the cable.

. Do NOT drop the control box or put heavy things on it.

. Do NOT place the charging cable near high-temperature objects.

. Do NOT place the unit in the car or in a closed room while charging.

. Do NOT use the unit in extreme temperatures. (Normal operating range: -30℃ to+50℃) .

. Do NOT charge if the power socket is damaged, rusted, cracked or loosely connected.

. Do NOT use this unit if the cable is damaged.

. Do NOT use this unit with an extension cord or adapter.

. Do NOT inset any fingers into the charging plug.

. Do NOT use this unit or try to repair it by yourself, if the unit does not work properly in accordance with the operating instructions. Contact the seller for after service.

. Do NOT contact metal conductor to prevent from the electric shock accident.

. Do NOT pound the unit to avoid reducing its working life because the product shell is made of thermoplastic.

. Only for EV charging.

. Use the product under the normal condition away from high temperature erosive materials or ignition source.

. Make sure that the charging plug, the cable and the control box are free from any signs of scratches, rust, cracks, etc.

. Before charging, make sure the power plug and outlet are compatible.

. Use only on the mains with fault current circuit breaker.

. The product must be grounded.

Symbol Meaning

Symbol

Meaning

Non-recyclable Mark

It is located on the product that indicates that the electrical and electronic equipment, including its accessories, should be treated separately from ordinary household waste. When scrapped, it should be treated as industrial waste. Otherwise, it may cause accidents.

Warning Sign

It indicates danger. Pay attention to the personal injury that may be caused by operation procedure or incorrect operation. Before using this product, please read the user instructions carefully.

The company is committed to the continuous improvement and update of the product. Product hardware and software will continue to upgrade.

Version: V2.0

Revision Date: 2023-01

FAQ

Q: Why can’t my charger be charged?

A: Please follow the red light flashes frequency to determine the specific error. Check the connection between the charging plug and vehicle as well as the power plug and the socket. Due to high temperatures, the circuit board is temporary shutdown to protect the charging safety and car battery. Please continue to charge after the temperature is reduced.

Q: Is it normal that my charger gets hot?

A: Due to the high current flows through the device, the charger will get hot at the interface, especially when charging outdoors at higher temperatures. If the temperature is too high, the charger switches to a lower current mode automatically to ensure the safety of the charging process. It’s suggested that using a lower current to charge at the normal situation in order to ensure safety.

Q: Why does the display of voltage and current fluctuates up and down?

A: Because the alternating current is unstable at home, voltage and power fluctuations are normal within 10 %. There is no effect on charging.

Q: Charging Indicator does not illuminate?

A: Check the circuit breaker and other circuit loads. Try another wall outlet.